An Approach toward evaluation of long-term fission product distributions in the Fukushima Daiichi Nuclear Power Plant after the severe accident

Uchida, Shunsuke; Karasawa, Hidetoshi; Kino, Chiaki*; Pellegrini, M.*; Naito, Masanori*; Osaka, Masahiko

Nuclear Engineering and Design, 380, p.111256_1 - 111256_19, 2021/08

https://doi.org/10.1016/j.nucengdes.2021.111256

It is essential to grasp the long-term distributions of FP as well as fuel debris all over the Fukushima Daiichi Nuclear Power Plant (1F) for safe completion of its decommissioning projects. The fuel debris is going to be removed from the plant under the severe conditions of FP being scattered during major decommissioning work, and then, the decommissioning projects are going to be terminated by storing safely the removed debris as recovered fertile materials or as materials for final radioactive disposal. In order to determine the FP distribution in the plant for the long period from the accident occurrence to the termination of the plant decommissioning, procedures for analyzing multi-term FP behaviors were proposed. The proposed procedures should be improved by applying the FP data measured in the plant and validated based on the feedback data. Then, the accuracy-improved procedures should be applied to estimate FP distribution during each period of the decommissioning projects.

Acceleration of fusion plasma turbulence simulation on Fugaku and Summit

Idomura, Yasuhiro; Ina, Takuya*; Ali, Y.*; Imamura, Toshiyuki*

Dai-34-Kai Suchi Ryutai Rikigaku Shimpojiumu Koen Rombunshu (Internet), 6 Pages, 2020/12

A new communication avoiding (CA) Krylov solver with a FP16 (half precision) preconditioner is developed for a semi-implicit finite difference solver in the Gyrokinetic Toroidal 5D full-f Eulerian code GT5D. In the solver, the bottleneck of global collective communication is resolved using a CA-Krylov subspace method, and halo data communication is reduced by the FP16 preconditioner, which improves the convergence property. The FP16 preconditioner is designed based on the physics properties of the operator and is implemented using the new support for FP16 SIMD operations on A64FX. The solver is ported also on GPUs, and the performance of ITER size simulations with trillion grids is measured on Fugaku (A64FX) and Summit (V100). The new solver accelerates GT5D by from the conventional non-CA solver, and excellent strong scaling is obtained up to 5,760 CPUs/GPUs both on Fugaku and Summit.

Study of SiC-matrix fuel element for HTGR

Mizuta, Naoki; Aoki, Takeshi; Ueta, Shohei; Ohashi, Hirofumi; Yan, X.

Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 5 Pages, 2019/05

Enhancement of safety and cooling performance of fuel elements are desired for a commercial High Temperature Gas-cooled Reactor (HTGR). Applying sleeveless fuel elements and dual side directly cooling structures with oxidation resistant SiC-matrix fuel compact has a possibility of improving safety and cooling performance at the pin-in-block type HTGR. The irradiated effective thermal conductivity of a fuel compact is an important physical property for core thermal design of the pin-in-block type HTGR. In order to discuss the irradiated effective thermal conductivity of the SiC-matrix fuel compact which could improve the cooling performance of the reactor, the maximum fuel temperature during normal operation of the pin-in-block type HTGR with dual side directly cooling structures are analytically evaluated. From these results, the desired irradiated thermal conductivity of SiC matrix are discussed. In addition, the suitable fabrication method of SiC-matrix fuel compact is examined from viewpoints of the sintering temperature, the purity and the mass productivity.

Investigation of system for volume-reduction and recycling of HLW

Nishihara, Kenji

ImPACT Fujita Puroguramu Kokai Seika Hokokukai "Kaku Henkan Niyoru Koreberu Hoshasei Haikibutsu No Ohaba Na Teigen, Shigenka" Seika Hokokusho, Shiryoshu, p.130 - 133, 2019/03

High level radioactive waste contains elements with various characteristics. It is possible to reduce the load on the disposal site by separating them according to those characteristics and appropriately dealing with them. In this project, we are working to shorten the life span of long-lived fission products (LLFP). When this technology is realized, high-level radioactive wastes will become new radioactive wastes with low radioactivity. As a result of investigation of disposal concept of new radioactive waste, it turned out that intermediate-depth disposal currently considered for low level radioactive waste may be suitable. Intermediate-depth disposal is a method of small-scale disposal in shallow locations as compared to geological disposal for conventional high-level radioactive waste. We conducted a safety assessment when this disposal is applied to new radioactive wastes, and found that it is possible to safely dispose of for the four LLFPs addressed by this project.

Evaluation of chemical speciation of iodine and cesium considering fission product chemistry in reactor coolant system

Ishikawa, Jun; Zheng, X.; Shiotsu, Hiroyuki; Sugiyama, Tomoyuki; Maruyama, Yu

Proceedings of Asian Symposium on Risk Assessment and Management 2018 (ASRAM 2018) (USB Flash Drive), 6 Pages, 2018/10

Comparison between HTFP code and minory changed FORNAX-A code

Aihara, Jun; Ueta, Shohei; Goto, Minoru; Inaba, Yoshitomo; Shibata, Taiju; Ohashi, Hirofumi

JAEA-Technology 2018-002, 70 Pages, 2018/06

JAEA-Technology-2018-002.pdf:1.46MB

HTFP code is code for calculation of additional release amount of fission product (FP) from fuel rod in high temperature gas-cooled reactor (HTGR) after stop of fission. Minory changed Fornax-A code also can calculate that. Therefore, release behavior of Cs calculated with HTFP code was compared with that calculated with minory modified FORNAX-A code in this report. Release constants of Cs evaluated with minory modified FORNAX-A code are rather different from default values for HTFP code.

Feasibility study of advanced measurement technology for solution monitoring at reprocessing plant; Dose rate measurement for the solution including Pu with FP

Matsuki, Takuya; Yamanaka, Atsushi; Sekine, Megumi; Suzuki, Satoshi*; Yasuda, Takeshi; Tsutagi, Koichi; Tomikawa, Hirofumi; Nakamura, Hironobu; LaFleur, A. M.*; Browne, M. C.*

Proceedings of INMM 58th Annual Meeting (Internet), 8 Pages, 2017/07

The Tokai Reprocessing Plant (TRP) has been developing a new detector from 2015 to 2017 for purpose to monitor Pu amount in High Active Liquid Waste (HALW) containing FP. It can make a contribution to an advanced approach to effectively and efficiently conduct safeguards for reprocessing facilities because it becomes available to monitor and verify nuclear material movement continuously by a new detector, which has proposed by IAEA. For the second step of this project, we conducted dose rate measurement on the guide rail installing in the cell storing the HALW tank and comparison between measured dose rate distribution and calculation result by MCNP simulation in order to investigate the dose rate distribution which is needed for shielding design of a new detector that is used for radiation (neutron/ spectrum) measurement in the cell and inquest on the monitoring position of the detector for Pu monitoring. In this paper, we report the result of the dose rate measurement in the cell, improvement of the simulation model which is cleared by comparison between measurement result and calculation result and our future plan.

Results and progress of fundamental research on FP chemistry

Osaka, Masahiko; Nakajima, Kunihisa; Miwa, Shuhei; Di Lemma, F. G.*; Miyahara, Naoya; Suzuki, Chikashi; Suzuki, Eriko; Okane, Tetsuo; Kobata, Masaaki

Proceedings of 8th European Review Meeting on Severe Accident Research (ERMSAR 2017) (Internet), 11 Pages, 2017/05

Fundamental research on fission product (FP) chemistry is underway at Japan Atomic Energy Agency. The purpose is to establish a FP chemistry database in each region of a LWR under severe accident conditions. Improvement of FP chemical models based on this database is also an important task of the research. Research outputs are reflected to the research and development of decommissioning of Fukushima Daiichi Nuclear Power Station (1F) and the enhancement of LWR safety. Four research items have thus been established considering the specific issues of 1F and the priority in the source term research area, as follows: - Effects of boron (B) release kinetics and thermal-hydraulic conditions on FP behavior, - Cesium (Cs) chemisorption and reactions with structural materials, - Establishment of a thermodynamic and thermophysical properties database for FP compounds, - Development of experimental and analytical techniques for the reproduction of FP behavior. In this paper, results and progress of the research are presented.

A Study on transmutation of LLFPs using various types of HTGRs

Kora, Kazuki*; Nakaya, Hiroyuki*; Matsuura, Hideaki*; Goto, Minoru; Nakagawa, Shigeaki; Shimakawa, Satoshi*

Nuclear Engineering and Design, 300, p.330 - 338, 2016/04

https://doi.org/10.1016/j.nucengdes.2016.01.030

In order to investigate the potential of high temperature gas-cooled reactors (HTGRs) for transmutation of long-lived fission products (LLFPs), numerical simulation of four types of HTGRs were carried out. In addition to the gas-turbine high temperature reactor system "GTHTR300", a small modular HTGR plant "HTR50S" and two types of plutonium burner HTGRs "Clean Burn with MA" and "Clean Burn without MA" were considered. The simulation results show that an early realization of LLFP transmutation using a compact HTGR may be possible since the HTR50S can transmute fair amount of LLFPs for its thermal output. The Clean Burn with MA can transmute a limited amount of LLFPs. However, an efficient LLFP transmutation using the Clean Burn without MA seems to be convincing as it is able to achieve very high burn-ups and produce LLFP transmutation more than GTHTR300. Based on these results, we propose utilization of variety of HTGRs for LLFP transmutation and storage.

HTFP for calculation of amount of additionally released fission products from fuel rods of pin-in-block-type high temperature gas-cooled reactors during accident

Nomoto, Yasunobu; Aihara, Jun; Nakagawa, Shigeaki; Isaka, Kazuyoshi; Ohashi, Hirofumi

JAEA-Data/Code 2015-008, 39 Pages, 2015/06

JAEA-Data-Code-2015-008.pdf:10.32MB

HTFP is a calculation code for amount of additionally released fission product (FP) from fuel rods of pin-in-type according to transient of core temperature at the accident of high temperature gas-cooled reactors (HTGRs). This code analyzes FP release inventory from core according to the transient of core temperature at the accident as an input data and considering FP release rate from a fuel compact and a graphite sleeve and radioactive decay of FP. This report describes the outline of HTFP code and its input data. The computed solutions using the HTFP code were compared to those of HTCORE code, which was used for the design of the High Temperature Engineering Test Reactor (HTTR) to validate the analysis models of the HTFP code. The comparison of HTFP code results with HTCORE code results showed the good agreement.